Create a national brand of oral dental equipment

Heart science and technology to protect health to create a national brand of oral dental equipment

Home page

Knowledge

Industry News

Company News

The daily maintenance of dental chair is introduced, come and collect!

Release time:

2022-12-01 11:11

Source:

Because the dental chair is the necessary equipment for dentists to treat patients, the utilization rate is high, and it is also a device that integrates gas, water and electricity. The daily maintenance is directly related to the life and integrity of the equipment, so the daily maintenance of the dental chair is particularly important.

牙科椅

1. The first is the maintenance of the mobile phone. The mobile phone is the key component of the dental chair. In use, in order to avoid cross-infection between patients, the mobile phone must undergo high temperature and high pressure sterilization. In order to extend the service life of the mobile phone, special attention should be paid to daily maintenance.

Before use, use an injection needle to drip 1~2 drops of high-speed lubricating oil into the shaft. Under normal circumstances, the front of the car is cleaned with cleaning lubricant once a day, and the miniature bearing is cleaned once every 2 weeks. The normal working pressure of 0.2 ~ 0.25Mpa should be maintained; When there is no water, the mobile phone should not be idle, otherwise the bearing will be damaged. When the needle roller becomes dull, replace the new needle roller in time, otherwise it will affect the life.

2. The maintenance of dental chair is mainly the maintenance of gas circuit and waterway. The gas, water and electricity should be turned off after work every day. It is especially worth mentioning that the gas in the tube cavity should be discharged with a three-use spray gun after the gas is turned off, so as to prevent the pipeline from being in a high pressure state for a long time and easy to age and crack. According to the local water quality, the water filter should be cleaned regularly and the accumulated in the air filter pressure reducing valve regularly discharged: clean the strong suction device and saliva suction device in time, often take clean water and clean the pipeline. Special attention should also be paid to the fact that the water pressure and air pressure should be within the specified range to avoid bursting filters and pipes: surgical lights and observation lights cannot be switched on and off frequently, which will shorten the life of the bulb.

3. For the maintenance of dental chairs, all transmission parts should be checked regularly, and mechanical transmission parts should be lubricated regularly. Electric transmission should check the oil quantity and oil quality of the oil tank regularly. When the oil quantity is insufficient or the oil quality is not good, it should be supplemented and replaced in time. When the belt is driven, pay attention to adjusting the tightness of the belt.

Dental chair is the medical equipment needed by dentists. Since the advent of electric dental drills in 1887, the performance and intelligence of dental chairs have been greatly improved. In recent years, the application of a large number of new technologies has made dental equipment more humane. There are two types of pneumatic and electric dental chairs.

Gas, water and electricity are the three required elements of dental comprehensive treatment chair. Therefore, before installation, be sure to lay the gas and water pipelines (as far as possible underground), try to install water filters in the waterway, so as not to affect the life of the water filter in the machine. The air pump should not be too close to the treatment chair, so as not to affect the patient's treatment due to the noise when pumping air. If there are more equipment, it is recommended to use centralized gas supply, which can save costs, reduce failures, and ensure the quality of gas supply.

Usually enough new equipment is installed and debugged by the manufacturer, but the doctor is present as much as possible during the installation process, so as to solve the problems in the future work as much as possible.

There are two types of dental chairs, one is conjoined, and the other is conjoined. It consists of a patient chair, a doctor's seat, a nurse's seat, a pedal, an operating light, a side box and a floor box. Among them, the patient's seat has electric There are two types of electric and manual, and the electric part includes spiral transmission, electro-hydraulic transmission and belt transmission. Manual control mainly uses the foot pedal to control the seat position by oil pressure. The therapeutic instrument is mainly composed of high-speed mobile phone, low-speed mobile phone (pneumatic or electric), three-use spray gun, salivary aspirator, automatic water feeder, appliance tray, shadowless lamp, X-ray observation lamp, tooth cleaner, light curing machine (usually optional), spittoon and gas, water and electricity control parts. The principle of action is mostly air-controlled water and electricity work for dental extraction, dental implant, dental repair and dental cleaning and other oral diseases.

What is the basic way to choose a dental chair? Do you know?

What are the characteristics of dental chair, dental comprehensive treatment machine manufacturers to explain for you

What is the basic way to choose a dental chair? Do you know?

What are the characteristics of dental chair, dental comprehensive treatment machine manufacturers to explain for you